İnternet sitemizde sizlere daha iyi hizmet sunulabilmesi için çerezler kullanılmaktadır.
Çerez tercihlerinizi değiştirmek ve çerezler hakkında detaylı bilgi almak için
KARNAS TEKNOLOJİ GRUP Çerez Politikası 'nı inceleyiniz.
Siteyi kullanmaya devam etmeniz durumunda KARNAS TEKNOLOJİ GRUP Çerez Politikası'nı kabul
etmiş sayılacaksınız.
Kabul Ediyorum
Planet PL-BSP-360
Endüstriyel Tip Yenilenebilir Enerjiden Beslenen Yönetilebilir PoE+ Switch (Industrial Renewable Energy PoE+ Managed Ethernet Switch) 5-Port 10/100/1000Base-TX RJ-45 (Port 1 to Port 5, bridge mod) (Port 5, gateway mod) with 4-Port IEEE 802.3at/af PoE+ Injector (Port 1 to Port 4) (Per port 30.8 watt) 2-Port 1000BASE-SX/LX/BX SFP/mini-GBIC yuva (Port-9 ve Port-10), 100Base-FX SFP uyumlu 1 x RJ45 port (management) 1 x USB port (backup) IP30, -10~60 Derece C PoE Power Usage Display
Stok yok.
Ürün Kodu : KRNS003748
Physical Port
- 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port 1 to Port 4)
- RJ45 type interface for basic management and setup
- USB type A female for setting file backup and restore
Power over Ethernet
- Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
- Backward compatible with IEEE 802.3af Power over Ethernet
- Up to 4 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 30 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100 meters
-
PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD alive-check
- PoE schedule
Battery Management
- Battery type option: Nickel-cadmium battery or lead-acid battery
- Easy diagnostic of the system operating status via LED indicator
- Battery current usage and status
- Battery capacity and power consumption statistics
- Low voltage cut-off protection: Send alert and cut off the low priority PoE port for the low power battery
-
Pulse Width Modulation (PWM) Protection
- Reverse current protection to prevent the current circuits from flowing back to the PV panel
- Over-current and over-temperature protection
- Reverse polarity protection (for battery and charging electrodes)
Industrial Case & Installation
- IP30 aluminum case
- DIN-rail and wall-mounted design
- Supports -10 to 60 degrees C operating temperature
- Supports ESD 6KV DC Ethernet protection
-
Redundant power design
- 24V~45V DC wide power input
Switching
- Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- 8K MAC address table size
- Automatic address learning and address aging
Router
- Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
- Static and dynamic (RIP1 and 2) routing
- IP/MAC-based bandwidth control
- Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
- 802.1d STP and IGMP Proxy
Security
- Port filtering lets you either allow or prevent which applications can access the Internet.
- MAC filtering allows you to include or exclude computers and devices based on their MAC address
- URL filtering allows you to control access to Internet websites in an URL list
- IP source guard prevents IP spoofing attacks
- DoS attack prevention
Management
-
Switch Management Interface
- IPv4 Web switch management- SNMP v1, v2c - Static and DHCP for IP address assignment
-
System Maintenance
- Firmware upload/download via HTTP
- Configuration upload/download through HTTP
- Hardware reset button for system reboot or reset to factory default - NTP Network Time Protocol
- SNMP trap for interface Link Up and Link Down notification
- Event message logging to remote syslog server
- PLANET Smart Discovery Utility
Hardware Specifications | |
Copper Ports |
LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode) WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode) |
PoE Injector Port | 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4) |
USB | 1 USB Type A female for setting backup |
Power Output |
4 PoE out 51VDC; max. 30 watts per PoE port 2 DC out 24@ 1A maximum (four-pin terminal block) * The voltage of DC out is based on the battery. |
Switch Architecture | Store-and-Forward |
Switch Fabric | 10Gbps/non-blocking |
Switch Throughput@64 bytes | 5.95Mpps@64 bytes |
MAC Address Table | 8K entries |
Shared Data Buffer | 512Kbit |
Flow Control |
IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Reset Button |
< 5 sec: System reboot > 5 sec: Factory default |
LED |
3 LEDs for System and Power:
4 LEDs for PoE Copper Ports (Port 1~Port 4):
1 LED for 10/100/1000T Copper Port (Port 5):
3 LEDs for PoE Power Usage (W)
|
Connector |
Removable 6-pin terminal block Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery |
Alarm |
1 Digital Output (DO): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Open collector to 24V DC, 100mA max. |
Power Requirements |
PV in: 24~45V DC Battery in/out: 24V DC |
Power Consumption/ Dissipation |
5.04 watts, 17.1BTU (Standby without PoE function) 6.96 watts, 23.7 BTU (Full loading without PoE function) 135.36 watts, 461.5 BTU (Full loading with PoE function) |
Dimensions (W x D x H) | 84 x 107 x 152 mm |
Weight | 1026g |
ESD Protection | 6KV DC |
Enclosure | IP30 aluminum case |
Installation | DIN-rail kit and wall-mount ear |
Power over Ethernet | |
PoE Standard | IEEE 802.3af/802.3at Power over Ethernet PSE |
PoE Power Supply Type | End-span |
PoE Power Output |
Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af) Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at) |
Power Pin Assignment | 1/2 (+), 3/6 (-) |
PoE Power Budget | 120 watts (PoE consumption + DC out and depending on power input) |
Max. Number of Class 2 PDs | 4 |
Max. Number of Class 3 PDs | 4 |
Max. Number of Class 4 PDs | 4 |
Electrical Characteristics | |
System Voltage Rating | 24V DC |
Maximum Charging Current | 6A |
Max. Solar Array VOC | 60V DC |
Max. Operating Voltage | 45V DC |
Total Current Consumption |
While operating -32mA At idle -11mA |
High Temperature Shutdown |
100 degrees C disconnect solar and load 80 degrees C reconnect solar and load |
Battery Charging Characteristics | |
Charge Algorithm | Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection. |
Maximum Output Current | 6A |
Nickel-cadmium Battery |
± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55 degrees C (Temperature compensation baseline@ 25 degrees C) |
Lead Acid Battery (Default Setting) |
± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @ 55 degrees C (Temperature compensation baseline@ 25 degrees C) |
Float Charge Voltage | DC 27.2V (26.0~30.0V) |
Absorption Charge Voltage | DC 29.2V (28.0~32.0V) |
LVD (Low Voltage Disconnection) | DC 22.2V (21.0~25.0V) |
LVR (Low Voltage Reconnection) | DC 24.8V (23.0~27.0V) |
Router Features | |
Internet Connection Type |
Shares data and Internet access with users, supporting the following internet accesses:
|
Firewall |
NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting Port Forwarding, and DMZ Built-in firewall with IP address/MAC address/Port/ URL filtering Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection |
Routing Protocol | Static/Dynamic (RIP1 and 2) routing |
VPN Pass-through | PPTP, L2TP, IPSec, IPv6 |
LAN |
Built-in DHCP server supporting static IP address distribution Supports UPnP, Dynamic DNS Supports IGMP Proxy Supports 802.1d STP (Spanning Tree) IP/MAC-based bandwidth control |
Management | |
Management Interface |
Setup of system/management functions Web firmware upgrade SNMP trap for alarm notification of events |
PoE Management |
Power limit by consumption and allocation PoE admin mode Per port power schedule Per port power enable/disable Power feeding priority Current per port usage and status Total power consumption PD alive check Scheduled power recycling |
Battery Management |
Battery current usage and status Battery capacity statistics Low Voltage Cut-Off Protection |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus RFC 768: UDP RFC 791: IP RFC 2068 HTTP RFC 1157: SNMP v1 RFC 1902: SNMP v2c RFC 5424: Syslog |
Environment | |
Operating |
Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage |
Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Özellik | Değer |
---|---|
Marka | : Planet |
Benzer Ürünler
© 2019 Copyright Karnas Teknoloji.