Physical Port

• 10-Port 10/100/1000BASE-T Gigabit RJ45 copper with 8-Port IEEE 802.3at PoE Injector (Port-1 to Port-8)
• 2 100/1000BASE-X mini-GBIC/SFP slots, SFP type auto detection
• RJ45 type console interface for basic management and setup

Wireless AP Management

• Automatically discovers managed APs, up to 32 units
• Locally maintains configuration profiles for all managed APs
• Centrally monitors all managed APs’ statuses and associated client list
• Eight built-in 802.3at PoE+ ports to directly manage AP power control
• AP alive check for automatic operating status diagnostic

Power over Ethernet

- Total PoE power budget control

- Per port PoE function enable/disable

- PoE Port Power feeding priority

- Per PoE port power limitation

- PD classification detection

- PD alive-check

• Complies with IEEE 802.3at Power over Ethernet Plus
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 8 ports for IEEE 802.3af/at devices powered
• Supports PoE power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Remote power feeding up to 100m
• PoE Management

Layer 2 Features

- Broadcast / Multicast / Unicast / Unknown unicast

• Storm Control support
• Supports VLAN

  - IEEE 802.1Q tagged VLAN

  - Up to 255 VLANs groups, out of 4095 VLAN IDs

  - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

  - Private VLAN Edge (PVE)

  - Protocol-based VLAN

  - MAC-based VLAN

  - IP Subnet-based VLAN

  - Voice VLAN

  - Management VLAN

• Supports Spanning Tree Protocol

  - STP, IEEE 802.1D Spanning Tree Protocol

  - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol

  - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol (via VLAN)

  - STP BPDU Guard and BPDU filtering

• Supports Link Aggregation

  - IEEE 802.3ad Link Aggregation Control Protocol (LACP)

  - Cisco ether-channel (static trunk)

  - Maximum 4 trunk groups, up to 4 ports per trunk group

  - Up to 8Gbps bandwidth (full duplex mode)

• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on a particular port
• Loop protection to avoid broadcast loops

Layer 3 IP Routing Features

• Supports maximum 32 software static routes and route summarization

Quality of Service

- IEEE 802.1p CoS

- TOS / DSCP / IP Precedence of IPv4/IPv6 packets

- IP TCP/UDP port number

- Typical network application

• Ingress Shaper and Egress Rate Limit per port bandwidth control
• 8 priority queues on all switch ports
• Traffic classification
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Traffic-policing policies on the switch port
• DSCP remarking

Multicast

• Supports IGMP Snooping v1, v2 and v3 for IPv4 multicasting network
• Supports MLD Snooping v1 and v2 for IPv6 multicasting network
• Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering
• MVR (Multicast VLAN Registration)

Security

− IEEE 802.1x Port-based / MAC-based network access authentication

− Built-in RADIUS client to co-operate with the RADIUS servers

− TACACS+ login users access authentication

− RADIUS / TACACS+ users access authentication

− IPv4 / IPv6 IP-based ACL

− MAC-based ACL

• Authentication
• Access Control List
• Source MAC / IP address binding
• Port Security for Source MAC address entries filtering
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• Auto DoS rule to defend DoS attack
• IP address access management to prevent unauthorized intruder

Management

- Console / Telnet command line interface

- Web switch management

- SNMP v1, v2c, and v3 switch management

- SSH / SSL secure access

- Firmware upload/download via HTTP / TFTP

- Configuration upload / download through web interface

- Dual images

- Reset button for system reboot or reset to factory default

- Built-in Trivial File Transfer Protocol (TFTP) client

• IPv4 and IPv6 dual stack management
• Switch management interfaces
• User privilege levels control
• System maintenance
• Four RMON groups (history, statistics, alarms and events)
• IPv6 IP Address / NTP / DNS management and ICMPv6
• BOOTP and DHCP for IP address assignment
• DHCP Relay
• DHCP Option82
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• PLANET Smart Discovery Utility for deployment management